Helium Flame 210 Multicolor Print Drone
Scott Smith

Last updated on May 19th, 2017 at 06:26 pm

This is a complete remix of the Helium Drone Designed by  Birdbone

All the original specifics for the Original version of this can be found here: https://pinshape.com/items/29604-3d-printed-birdbone-helium-210-fpv-quadcopter

This has been modified to allow for multi color printing once the Prusa Multi-Color Update has shipped.

Some 3D Renders of the files and the download available below.

Helium_Flame

Body

Flames

Motors
These Parts are not intended to be printed individually and should be merged in your slicing app so they print as one piece. Multiple extruders are of course needed and you will select the filament colors to use based on the model part assigned to a specific extruder. Several slicer’s are capable of doing this and I will post up a tutorial in the near future and link to it from this post. Some general information relating to Simplify 3D can be found here relating to this topic,

Download “Helium Flame 210 Drone” Helium_Flame_210.zip – Downloaded 40 times – 22 MB

 

Join in Comment below...